PRODUCT PAGE

ARMORCEL 200

CONCRETE ADMIXTURES

SNF Based Accelerating Admixture for Concrete and Mortar

ARMORCEL 200® is a non-chloride SNF based concrete and mortar set accelerator, ready-to-use liquid admixture. It accelerates initial setting time one to three times faster than normal mortar and concrete without adversely affecting other properties of concrete and mortar.

 

ARMORCEL 200 improves workability and strength while hastening the hydration of cement. It makes the mix easier to place and speeds construction by shortening the initial set and curing time without resulting in slump loss. Time and labor are saved because formwork and other protection can be removed earlier and finishing can be started.

ARMORCEL 300

PCE Based Accelerating Admixture for Concrete and Mortar

ARMORCEL 300® is a non-chloride PCE based concrete set accelerator, ready-to-use liquid admixture. It accelerates initial setting time one to three times faster than normal mortar and concrete without adversely affecting other properties of concrete and mortar

 

ARMORCEL 300 improves workability and strength while hastening the hydration of cement. It makes the mix easier to place and speeds construction by shortening the initial set and curing time without resulting in slump loss. Time and labor are saved because forms and other protection can be removed earlier and finishing can be started.

ARMORSIL RETARDER 100

Water Reducing, Retarding and Plasticizing Admixture,

ARMORSIL Retarder 100 is an SNF based water reducing and set time retarding admixture for concrete. ARMORSIL Retarder does not contain calcium chloride and other corroding materials. ARMORSIL Retarder is a blend of polymer based plasticizer and proprietary retarding agent. The chemical process of ARMORSIL Retarder when activated temporarily stops the hydration process, delaying the initial setting time in proportion to the amount of dosing. At the completion of the initial setting time, curing commences at a regulated rate.

ARMORSIL RETARDER 200

PCE Based Water Reducing, Retarding and Plasticizing Admixture

ARMORSIL Retarder 200 is a PCE based water reducing and set time retarding admixture for concrete. ARMORSIL Retarder does not contain calcium chloride and other corroding materials. ARMORSIL Retarder is a blend of polymer based plasticizer and proprietary retarding agent. The chemical process of ARMORSIL Retarder when activated temporarily stops the hydration process, delaying the initial setting time in proportion to the amount of dosing. At the completion of the initial setting time, curing commences at a regulated rate. Concrete with ARMORSIL Retarder 200 can maintain workability in excess of 3 hours

Super Plasticizer for Masonry Blocks and Paver Industry

HYDROPLAST-50 is a high performance, liquid, water-reducing “plasticizer” admixture formulated to improve the cohesiveness of wet and semi-dry mortar and concrete used for masonry block making and paving stones.  Once incorporated in the mix, HYDROPLAST-50 has excellent air entrainment properties which controls the amount of microscopic air bubbles and increase the cohesion of wet or dry mix mortar or concrete. It is specially researched for the manufacture of block and paving stones.

HYDROPLAST 50
HYDROPLAST 60
HYDROPLAST 100

Complete High Performance Water Reducing Super-plasticizer

HYDROPLAST-100 is a high performance, liquid, water-reducing “plasticizer” admixture formulated to improve workability, reduce permeability and improve durability.  Once incorporated in the mix, HYDROPLAST-100 is adsorbed on the cement particles’ surface inducing a powerful deflocculating property, effectively reducing the concrete mixing water demand and improving physical and mechanical properties of the resultant concrete. HYDROPLAST-100 is based on a blend of SNF and organic modifiers designed with the main purpose of reducing workability loss.

HYDROPLAST 200
HYDROPLAST 300

High Performance Water Reducing (PCE) Super Plasticizer

HYDROPLAST-300 is a third generation high performing polycarboxylate ether super-plasticizer with impressive water reducing properties. HYDROPLAST-300 allows for the production high consistency mixed batches with low water–cement ratio, ensures extended workability and improves early and final strength development. HYDROPLAST-300 is suitable for HOT and Cold Weather climate, minimizes bleeding and segregation tendencies. HYDROPLAST-300 is specifically engineered for the ready mix and precast industry, where high water reduction and consistently mixed batch is of paramount importance.  

HYDROPLAST 400

High Performance (PCE) Slump Extending and Water reducing Super-Plasticizer

HYDROPLAST-400 is a fourth generation high performing polycarboxylate ether super-plasticizer designed to produce ready mix concrete with low water to cement ratio, impressive workability and slump retention. It is specifically designed for ready mix industry where high workability, improved water reduction with extended slump retention is of critical importance in achieving high quality and durable concrete. 

HYDROPLAST-400 allows for the achievement of desired strength with reduced cement usage without losing workability. It allows for the production high consistency and quality concrete with low water – cement ratio, ensures a controlled extended workability and improves early strength development. HYDROPLAST-400 is suitable for HOT and COLD climate, minimizes bleeding and segregation tendencies.
 

HYDROPLAST 500

Slump Extending and Workability Enhancing (PCE) Super-plasticizer

HYDROPLAST-500 is a 4th generation high performing polycarboxylate ether super plasticizer with enhanced workability, impressive water reducing, extended slump retention and anti bleeding and segregation properties. It is particularly suitable for ready mix industry where concrete is transported for long distances and slump retention is important

HYDROPLAST-500 allows for the production high quality concrete with low water – cement ratio, ensures a controlled extended workability and improves early strength development. HYDROPLAST-500 is suitable for HOT and COLD climate, minimizes bleeding and segregation tendencies.
 

HYDROPLAST 600

4th Generation (PCE) High Performance Concrete Pumping Super Plasticizer

HYDROPLAST-600 is a 4th generation high performing polycarboxylate ether super plasticizer for self compacting and pumped concrete with impressive water reducing, extended slump retention and anti bleeding and segregation properties.

HYDROPLAST-600 allows for the production high consistency mixed pumped concrete with low water – cement ratio, ensures a controlled extended workability and improves early strength development. HYDROPLAST-600 is suitable for HOT climate, minimizes bleeding and segregation tendencies.

TECHNICAL

DATA

Request For Information

Request For Quotation

HYDROPLAST 50

Super Plasticizer for Plaster and Mortar Placement

HYDROPLAST-60 is a high performance, liquid, water-reducing “plasticizer” admixture formulated to improve the plasticity, cohesiveness and durability of mortar and plaster. Once incorporated in the mix, HYDROPLAST-60 has excellent air entrainment properties which controls the amount of microscopic air bubbles and increase the cohesion of mortar and plaster. It is specially researched for the placement of plaster and mortar. 

Complete High Performance Water Reducing Super-plasticizer

HYDROPLAST-200 is a high range, water-reducing “plasticizing” admixture formulated to improve workability, reduce permeability and improve durability.HYDROPLAST-200 is based on a blend of synthetic polymer and organic substances and other additives to improve performance. HYDROPLAST-200 is specifically suitable for HOT weather climates. HYDROPLAST-200 is formulated for effectively reducing the concrete mixing water demand and improving physical and mechanical properties of the resultant concrete. HYDROPLAST-200 is compatible with mineral based admixtures such as Silica Fume.

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

TECHNICAL

DATA

Set2Build.com is a Construction resource hub for finding building materials and vendors, as well as support for building and construction needs from construction planning through design to project execution. Easily search, compare and select products and service providers using our expansive listing and resource base. Download technical details of products like CAD, BIM, Spec, Catalogues and much more. Obtain free access to industry trends and daily updates of building materials. We are committed to assisting you find the right product or service anytime, anywhere. …..using the Set2Build.com service is Free!

Copyright © Set To Build Nigeria Ltd 2018